TEF1126P-24-250W is a unmanaged PoE switch independently designed by Tenda. Compliant with IEEE802.3af and IEEE 802.3at standards, it can identify PoE-powered devices intelligently. With a maximum PoE power output of 230 W, and 30 W for a single port, it can supply power when transmitting data with APs, IP cameras, and IP phones. The switch supports 4 working modes, including standard, priority, extend and VLAN modes, is an ideal choice for SMBs, hotels, schools, factories with video surveillance and wireless networking requirements.
|Standard & Protocol||IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at|
|LED indicator|| 24 × Link/Act LEDs
1 × G1 LED
1 × G2/SFP2 LED
1 × PoE-MAX LED
1 × Power LED
|Interface|| 24 × 10/100 Mbps Base-TX RJ45 ports (Data/Power)
1 × 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 × 1000 Mbps Base-X SFP port (Combo)
|Forwarding Rate||6.55 Mpps|
|Switching Capacity||8.8 Gbps|
|MAC Address Table||16K|
|Lightning Protection||≥ 6KV|
|Input Voltage||AC: 100-240V~50/60Hz|
|PoE Supply|| Ports 1-24 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power
|Power Consumption||250W output the whole device|
|Dimension||440 × 178.8 × 44mm|
|Four Modes|| Standard: Default mode of the switch. In this mode, it works as an unmanaged switch
all ports can communicate with each other separately.
Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1– 8 serve as high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
|Environment|| Operating Temperature: 0°C~45°C (32°F~113°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
|Certification||CCC, FCC, CE, RoHS|